COSHH Assessments For Safer Engineering Workshops
Engineering workshops contain a wide range of substances that can harm people through breathing, skin contact, swallowing or accidental injection. Metalworking fluids, welding fume, cleaning solvents, paints, adhesives, oils and process chemicals may be familiar parts of daily work, yet each can create a different exposure risk.
A Control of Substances Hazardous to Health (COSHH) assessment helps employers understand those risks and decide how they will be controlled. It is a practical workplace assessment rather than a paperwork exercise. The quality of the assessment depends on how accurately it reflects the tasks, equipment, materials and behaviour found in the workshop.
For businesses, apprentices and experienced engineers, knowing how COSHH works supports safer working practices and stronger compliance. It also makes training more relevant because workers can connect control measures with the real activities taking place around them.
What COSHH covers in an engineering environment
COSHH applies to substances that can harm health. These may be supplied chemicals with hazard labels, substances created during a process, or naturally occurring materials such as dust and fumes. In an engineering workshop, the list may include degreasers, cutting fluids, welding emissions, abrasive dust, resin systems, paints, battery chemicals and gases used in manufacturing processes.
The risk is determined by the way a substance is used, not simply by its name. A small amount of solvent used briefly in a closed container may present a different risk from the same solvent sprayed repeatedly in a poorly ventilated area. Grinding stainless steel, machining composite materials or welding coated metals can also generate hazardous airborne contaminants that are not obvious from the original product label.
COSHH does not replace other workplace risk assessments. Noise, vibration, machinery guarding, fire, pressure systems, explosive atmospheres and manual handling may be controlled under separate legislation and procedures. For example, flammable solvents may require consideration under the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR), while machinery used to apply a chemical must still be assessed for mechanical safety.
Finding hazards before assessing exposure
The first stage is to create a reliable inventory of substances and hazardous processes. Safety data sheets are useful starting points, but they do not constitute a completed COSHH assessment. Employers need to examine how products are delivered, stored, transferred, mixed, applied, heated, sprayed, machined or disposed of.
A workshop walk-through often reveals hazards that a product list misses. Look for visible mist around a machine, residue on gloves, settled dust near extraction points, open solvent containers, contaminated rags and makeshift decanting arrangements. Speak with engineers and apprentices because they often know which tasks create splashes, odours, smoke or recurring skin problems.
Exposure routes should be considered for every activity. Inhalation is a common concern with welding fume, airborne dust, vapour and mist. Skin exposure may occur when handling wet metalworking fluids or contaminated tools. Eye contact can result from splashes, while ingestion can occur when workers eat, drink or touch their face without washing their hands. Injection injuries may happen when high-pressure hydraulic or cutting-fluid equipment penetrates the skin.
Choosing effective control measures
COSHH requires employers to prevent exposure where reasonably practicable or adequately control it when prevention is not possible. The preferred approach is to consider whether a hazardous substance or process can be eliminated, substituted or enclosed before relying on personal protective equipment.
Substitution might involve selecting a less hazardous cleaning agent, a lower-fume welding consumable or a metalworking fluid with reduced skin sensitisation potential. Process changes can also reduce exposure, such as using pre-mixed products, closed dispensing systems, automated dosing or wet methods that suppress dust. These solutions are usually more dependable than asking workers to remember additional protective steps.
Local exhaust ventilation (LEV) is often important in workshops. Fume extraction at a welding bench, capture hoods for solvent use and mist extraction on machine tools can remove contaminants close to their source. LEV must be correctly designed, positioned, used and maintained. Employers should retain examination and testing records, and workers need to know how to recognise poor airflow or a defective system.
Personal protective equipment remains valuable when other controls cannot provide sufficient protection. Gloves, eye protection, protective clothing and suitable respiratory protective equipment (RPE) must match the substance and task. RPE selection should take account of the contaminant, concentration, work duration and compatibility with other equipment. Tight-fitting masks require face-fit testing, and facial hair can prevent an adequate seal.
Comparing workshop hazards and controls
The right control depends on the hazard, how it is generated and the likely route of exposure. A general-purpose assessment that says “wear PPE” will rarely provide enough detail for a busy engineering environment.
| Workshop hazard | Typical exposure concern | Preferred controls | Supporting checks |
|---|---|---|---|
| Welding fume | Inhalation of metal fume and gases | Capture extraction, suitable welding methods, clean materials, RPE where required | LEV examination, fume-control training, respiratory protection records |
| Metalworking fluids | Dermatitis, respiratory irritation and contact with contaminated fluid | Enclosed delivery, fluid management, skin protection, hygiene facilities | Fluid concentration checks, skin inspections, health surveillance where indicated |
| Solvents and degreasers | Vapour inhalation, skin absorption, eye contact and fire risk | Substitution, closed containers, dispensing controls, ventilation and chemical-resistant gloves | SDS review, storage inspection, DSEAR assessment where relevant |
| Grinding and machining dust | Inhalation of metal, paint or composite dust | On-tool extraction, enclosure, suitable cleaning methods and RPE | Air monitoring when needed, extraction checks, housekeeping audits |
| Paints, resins and adhesives | Sensitisation, respiratory effects and skin contact | Less hazardous products, controlled mixing, extraction, gloves and eye protection | Product-specific COSHH assessment, training, health surveillance if required |
This comparison should guide further investigation rather than replace it. The same substance may need different controls in a maintenance bay, a training workshop and a production cell. Assessments should reflect quantities, frequency, temperature, ventilation, task duration and the competence of the people carrying out the work.
Recording the assessment clearly
A useful COSHH assessment identifies the substance or process, the people exposed, the potential health effects and the controls required. It should state who may be affected, including cleaners, maintenance staff, contractors, visitors and trainees who may enter the area for short periods.
The document should describe the task in plain language. “Use degreaser safely” is too vague. A stronger entry might explain that an operator fills a small parts-washing unit twice per shift, keeps the lid closed when the unit is not in use, wears specified gloves and eye protection, disposes of solvent waste in a labelled container and reports damaged seals or ventilation problems.
Emergency arrangements need equal attention. Workers should know what to do after a splash, spill, inhalation incident or contaminated clothing event. Suitable eyewash, emergency showers where appropriate, spill materials, first-aid arrangements and incident reporting procedures should be available and maintained. The assessment should link to the relevant safety data sheet and explain when medical advice is needed.
Monitoring, health surveillance and review
Some risks can be managed through observation and good supervision, while others may require workplace exposure monitoring. Air sampling can help determine whether welding fume, dust, vapour or mist is adequately controlled. Monitoring may be appropriate when there is uncertainty about exposure, when controls have changed, or when a substance has a strict workplace exposure limit.
Workplace exposure limits are useful benchmarks, but staying below a limit does not remove the need to apply good control practice. Short-term peaks, skin exposure and combined effects may still matter. Measurements should be interpreted by a competent person and followed by action where results indicate that controls are insufficient.
Health surveillance may be needed when workers are exposed to substances linked to identifiable health effects and there is a reasonable likelihood that disease could develop. Examples can include skin checks for dermatitis risks or respiratory assessments for certain dusts, fumes and sensitising substances. Surveillance should be planned with competent occupational health support rather than treated as a substitute for effective control.
COSHH assessments should be reviewed when products, equipment, processes or working conditions change. They should also be revisited after an incident, a near miss, an ill-health report, an unsatisfactory LEV examination or evidence that workers are not following the intended method. Regular review keeps the assessment connected to actual workshop practice.
Turning written controls into daily practice
Training is essential because even well-designed controls can fail if workers do not understand their purpose. Engineers should know the hazards of the substances they use, the correct operating method for extraction, the limits of their PPE and the actions required during a spill or exposure incident.
Supervisors have a central role in checking that controls are being used. This includes confirming that extraction is switched on, containers are closed, waste is segregated, gloves are suitable and contaminated clothing is not taken into clean areas. Routine conversations and short practical demonstrations can identify weaknesses sooner than an annual document review.
Industrial training environments can provide a valuable bridge between written procedures and workplace behaviour. Practical exercises in realistic process-plant or engineering settings allow learners to recognise hazard labels, select controls, use PPE correctly and respond to abnormal conditions. This is particularly useful for apprentices and new starters who may be encountering chemical hazards for the first time.
A strong safety culture also encourages early reporting. Workers should be able to report damaged extraction, recurring skin irritation, unusual odours or poor-quality PPE without fear of blame. These reports provide evidence about whether the COSHH assessment is working in practice.
Practical priorities for employers and learners
- Keep a current register of hazardous substances, including materials created by workshop processes.
- Observe real tasks and consult the people who perform them before writing or updating an assessment.
- Use elimination, substitution, enclosure and LEV before depending on PPE alone.
- Provide task-specific instruction, suitable PPE, hygiene facilities and clear emergency arrangements.
- Review assessments after changes, incidents, health concerns, monitoring results or equipment failures.
COSHH competence grows when people can apply the principles to realistic tasks rather than memorise isolated rules. Employers can strengthen their arrangements through suitable COSHH training, competent advice and regular workplace checks. Learners can build confidence by asking how a substance is controlled, what exposure route is involved and what action is required if the control fails.
At HCF CATCH, practical engineering and industrial training is delivered in an environment designed to reflect the demands of real workplaces. Courses and hands-on activities can help employers, apprentices and teams develop safer approaches to chemical handling, process operations and workshop risk. Contact the centre to explore relevant training, facility tours or a suitable space for an organisation-wide safety session.