Why Human Factors Matter at Major Accident Hazard Sites
Major accident hazard sites handle substances, energy and processes capable of causing fires, explosions, toxic releases or serious environmental harm. Their safeguards may include alarms, shutdown systems, containment, inspections and emergency plans. Yet these controls depend on people making sound decisions, carrying out tasks correctly and responding effectively when conditions change.
That is why human factors are included in major accident hazard sites. Human factors considers how people interact with equipment, procedures, information, colleagues and the wider organisation. It covers individual behaviour, workplace design, competence, supervision, communication, fatigue, workload and safety culture.
A technically reliable plant can still become unsafe if an operator cannot interpret an alarm, a maintenance team works from an unclear isolation plan, or a supervisor accepts an unsafe shortcut. Understanding these influences helps employers prevent major accidents before a small error develops into a loss of containment or uncontrolled process event.
Major Accident Risk Begins With People
Major accident prevention is often associated with engineering controls. Pressure relief devices, fire protection, gas detection and automated interlocks are essential, but they do not operate in isolation. People specify, install, test, maintain, monitor and override these systems. Human decisions influence whether a barrier is available when it is needed.
A process operator may have to recognise an abnormal trend and take action before an automatic trip occurs. An engineer may need to assess whether a temporary modification affects plant safety. A maintenance technician may determine whether equipment has been fully isolated. Each decision can strengthen a safety barrier or weaken it.
Human performance is shaped by the conditions in which work takes place. Poor lighting, confusing displays, excessive noise, inconvenient valve locations, time pressure and unclear responsibilities all increase the likelihood of error. A fair safety assessment therefore asks why an error was possible, rather than simply identifying who made it.
This approach is particularly important at COMAH establishments, where dangerous substances are present in quantities that could create major accident consequences. Human factors analysis supports the wider safety management system by examining how work is actually performed, including routine operations, non-routine tasks and emergency response.
How Human Error Becomes a Major Accident
Human error is not a single event with one cause. It can involve a missed step, an incorrect action, a delayed response, a poor decision or a failure to recognise a developing problem. Some errors occur during familiar tasks because attention is divided or conditions have changed. Others arise when procedures are incomplete, training is inadequate or equipment gives misleading information.
A site may also experience latent conditions. These are weaknesses that remain hidden until several circumstances align. Examples include an outdated operating instruction, insufficient staffing, weak permit-to-work controls or a design that makes two similar valves easy to confuse. The person closest to the event may trigger the final action, but the conditions for failure can have developed over months or years.
Work organisation matters as much as individual competence. Shift handovers, contractor coordination, control-room communication and management of change can all affect risk. If a new chemical, control system or production target is introduced without considering its effect on workload and decision-making, existing safeguards may become less dependable.
Learning from incidents and near misses allows organisations to identify these weaknesses. Effective investigations examine the task, environment, supervision and systems around an event. They avoid treating retraining as the automatic answer when the real problem may be poor design, conflicting priorities or a procedure that cannot realistically be followed.
Human Factors Within COMAH Safety Management
For major hazard operators, human factors should be embedded in the safety management system rather than treated as a separate campaign. The assessment should begin during design and continue through commissioning, operation, maintenance, modification and eventual decommissioning.
A suitable programme usually includes a review of safety-critical tasks, the competence required for those tasks, the potential for human error and the controls available to prevent or recover from it. Employers should define which activities are safety critical, how performance is monitored and what assurance demonstrates that controls remain effective.
Human factors also supports legal and regulatory expectations around the control of major accident hazards. In the UK, operators need to demonstrate that risks have been assessed and reduced so far as is reasonably practicable. That evidence should include consideration of foreseeable human actions, foreseeable mistakes and the organisational factors that influence them.
The strength of the system depends on connecting different disciplines. Process safety specialists, operations teams, engineers, occupational health professionals and training managers may each see a different part of the risk. Bringing their knowledge together creates a more accurate picture of how a major accident could develop and how it can be prevented.
Designing Work for Reliable Decisions
Good human factors design makes the safe action clear, practical and achievable. Procedures should reflect the real sequence of work, use language that operators understand and identify critical checks without burying them in unnecessary detail. Instructions must be reviewed when equipment, chemicals, software or operating conditions change.
Control rooms and field equipment should provide information in a form that supports quick and accurate decisions. Alarm systems need sensible priorities, clear descriptions and manageable volumes. Labels, colour coding, access arrangements and equipment layout can reduce the chance of selecting the wrong component or missing an important indication.
| Human factor | Potential weakness | Useful control |
|---|---|---|
| Competence | A worker has limited experience of an abnormal condition | Structured training, supervised practice and competence assessment |
| Procedures | Instructions are unclear, outdated or difficult to access | User-tested procedures with controlled review and change management |
| Fatigue | Long shifts reduce attention and reaction speed | Fatigue risk assessment, suitable rotas and effective handovers |
| Communication | Critical information is lost between teams or shifts | Standard handover formats, repeat-back methods and clear ownership |
| Equipment design | Displays, controls or valves are confusing | Human-centred design review, labelling and error-tolerant layouts |
| Safety culture | Production pressure discourages escalation | Visible leadership, fair reporting and protection for safety concerns |
Work planning should also recognise that people do not perform identically throughout a shift or across different conditions. Fatigue, heat, stress, unfamiliarity and interruptions can affect attention. Controls such as rest arrangements, staffing levels, task sequencing and supervision help maintain reliable performance.
A strong design does not assume perfect concentration. It includes verification, independent checking, interlocks and automatic protection where appropriate. These measures create layers of defence, reducing the chance that one slip or lapse will progress into a major event.
Building Competence Through Practice
Competence involves more than completing a course or reading a procedure. It combines knowledge, practical skills, judgement and the ability to apply them in the conditions found on site. Operators and technicians need to understand the hazards of the process, the purpose of critical safeguards and the correct response to abnormal situations.
Practical training is valuable because it allows people to experience equipment, procedures and decision-making in a controlled setting. Realistic exercises can reveal whether instructions are usable, whether alarms are understood and whether teams communicate effectively under pressure. They also give learners an opportunity to make mistakes safely and correct them before working on a live process.
Apprenticeships can build this capability over time by combining structured learning with supervised workplace experience. Employers developing future process, engineering or electrical specialists can explore apprenticeship pathways that connect technical knowledge with practical competence.
Refresher training should be based on risk, role and evidence rather than delivered as a routine exercise with no clear purpose. A worker who rarely encounters an emergency shutdown may need realistic practice, while a team affected by a process modification may need focused instruction on new hazards and controls.
Turning Lessons Into Everyday Control
A human factors programme must be visible in everyday work. Leaders can demonstrate its value by discussing workload, staffing, procedure quality and operational pressure during safety meetings. When workers report confusing equipment or an impractical instruction, the response should focus on resolving the hazard rather than discouraging future reporting.
Performance indicators should provide useful insight into how safety-critical work is controlled. Measures might include completion and quality of competence assessments, overdue procedure reviews, alarm management performance, handover quality, fatigue-related concerns and actions from human factors reviews. Accident frequency alone cannot show whether major accident barriers are becoming weaker.
Emergency exercises provide another opportunity to test human performance. A written plan may appear comprehensive, yet an exercise can reveal unclear command arrangements, incompatible radio systems, poor access to information or delays in contacting external responders. Lessons should be assigned to named owners and checked for completion.
Contractors must be included in these arrangements. They may carry out maintenance, inspection, construction or specialist operations that affect safety-critical equipment. Clear induction, competence checks, permit controls and communication standards help ensure that temporary or third-party work does not introduce unmanaged risk.
Practical Priorities for Site Leaders
Site leaders can strengthen human performance by treating it as a process safety issue with clear ownership and resources. The following priorities provide a practical starting point:
- Identify safety-critical tasks and analyse the human actions that prevent, detect or mitigate major accident scenarios.
- Review procedures with the people who use them, checking that they match real equipment, conditions and work sequences.
- Assess fatigue, workload, staffing and shift handovers wherever attention and response time are safety critical.
- Use realistic drills, simulations and supervised practice to verify competence in abnormal and emergency situations.
- Investigate near misses for organisational and design weaknesses, then track corrective actions until their effectiveness is demonstrated.
These actions work best when supported by worker involvement. Operators, maintenance teams and contractors often understand practical difficulties that are not visible in formal risk assessments. Their experience can improve procedures, remove unnecessary complexity and identify weak signals before they become incidents.
Human factors should also be reviewed whenever the site changes. A new production target, control system, chemical, shift pattern or contractor arrangement can alter workload and risk. Including human performance in management of change ensures that the organisation considers how people will interact with the revised process before it goes live.
Major accident prevention depends on dependable barriers, and people are involved in almost every barrier on an industrial site. Building capability through practical training, realistic assessment and well-designed work helps employees recognise hazards, make sound decisions and respond decisively when conditions are abnormal.
HCF CATCH provides a realistic live-process-plant environment for developing process, engineering, electrical, safety and renewable energy skills. Employers, apprentices and operational teams can strengthen their human factors capability through hands-on learning that connects safe systems of work with the realities of industrial practice. Explore the available training and employer support to make reliable human performance part of everyday major hazard control.